Advanced Configuration; Power Supply Function; Advanced Settings - Victron energy Blue Smart IP67 Charger 12/7 Anleitung

Inhaltsverzeichnis

Verfügbare Sprachen

6. Advanced Configuration

In specific use cases where the integrated charge modes are not suitable/ideal for the battery

type being charged or the battery manufacturer recommends specific charge parameters and

fine tuning is desired, advanced configuration is possible with a Bluetooth enabled device

(such as a mobile phone or tablet) using the VictronConnect app.

For most common battery types, advanced configuration is not required or recommended; the

integrated charge modes and adaptive charge logic are typically suitable and perform very

well.

The Victron Blue Smart Charger range are also suitable for use as a DC power supply, to

power equipment without a battery connected (or while also connected to a battery).

While it's still possible to use the charger as a power supply without changing any settings, a

dedicated 'Power supply' mode exists for this purpose/usage.

If the charger will be used as a power supply, it is recommended to activate 'Power supply'

mode, as it will disable the internal charge logic and provide a constant DC supply voltage.

To activate power supply mode, open the settings menu and in the 'Function' drop down menu select

'Power supply' mode; once activated the STATUS LED will be illuminated.

It is also possible to enable low current mode or night mode while in power supply mode and

to specify the desired output voltage.

To return the charger back to normal use as a battery charger, access the settings menu and

in the 'Function' drop down menu select 'Charger' mode again.

The advanced settings menu enables specific configuration of charge parameters and user

defined settings to be saved and easily loaded.

(Using VictronConnect)

Inhaltsverzeichnis