Quick Start Guide - Victron energy Blue Smart IP67 Charger 12/7 Anleitung

1. Quick Start guide

a) Connect DC cables to the charger and then the battery or batteries; ensure that there is a
good electrical connection and keep the terminals away from any surrounding objects that
could cause a short circuit.
b) Connect the AC power cable to a mains power outlet; the POWER (green) LED will be illuminated
when the Blue Smart Charger is powered up. When the STATUS (yellow) LED is blinking fast the
charger is in bulk stage.
c) Select the charge mode appropriate for the battery type; using the VictronConnect app select the
required 'charge preset' and the 'maximum charge current' (standard or low) directly from the
settings list – see section 4.2 'Using VictronConnect' for more information.
3