Herunterladen Inhalt Inhalt Diese Seite drucken

Features; Operation; Multi-Stage Charge Algorithm; Temperature Compensation - Victron energy Blue Smart IP22 Charger 12/15 Anleitung

Vorschau ausblenden Andere Handbücher für Blue Smart IP22 Charger 12/15:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 81

2. Features

a) Bluetooth setup and monitoring (Using VictronConnect)
Easily setup, monitor or update the charger firmware using the VictronConnect app and a
Bluetooth enabled device (such as a mobile phone or tablet).
b) Multi-stage charge algorithm
The multi-stage charge algorithm is specifically engineered to optimise each recharge cycle and
charge maintenance over extended periods.
c) Adaptive absorption
Adaptive absorption monitors the battery's response during initial charging and intelligently
determines the appropriate absorption duration for each individual charge cycle.
This ensures that the battery is fully recharged regardless of the discharge level or capacity and
avoids excessive time at the elevated absorption voltage (that can accelerate battery aging).
d) Temperature compensation
Charge voltage is automatically compensated depending on the ambient temperate; this
ensures that the battery is charged at the optimal charge voltage regardless of the climate and
avoids the need for manual settings adjustments.
Temperature compensation is not required and automatically disabled when in LI-ION charge
mode.
e) High efficiency
The Blue Smart Charger range is up to ~95% efficient; resulting in lower power usage, less
heat generated and cooler operation.
f)
Durable and safe
i.
Engineered to provide years of trouble-free and dependable operation in all usage
conditions
ii.
Protection against overheating: output current will be reduced if the charger temperature
increases to 50°C
iii.
Integrated cooling fan to maintain low charger temperature during highly demanding
conditions and avoid the need for current reduction
iv.
Protection against short circuit: If a short circuit condition is detected the charger will
immediately shut down
v.
Protection against reverse polarity connection: If the charger is incorrectly connected to a
battery with reverse polarity the user replaceable fuse will blow
g) Silent operation
Charger operation is totally silent whilst the cooling fan is off; the cooling fan is only activated
during demanding periods, when it is necessary.
If the NIGHT or LOW mode is activated; the maximum output current is reduced to 50% of
nominal and the cooling fan will always remain off.
h) Lithium Ion compatible
Compatible with Li-ion (LiFePO₄) batteries; when the integrated LI-ION charge mode is selected
the charge cycle settings are altered to suit.
If the charger is connected to a battery where under voltage protection (UVP) has tripped, the
Blue Smart Charger range will automatically reset UVP and start charging; many other
chargers will not recognise a battery in this state.
Warning: Never charge a Li-ion battery when its temperature is below 0°C.
5

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Blue smart ip22 charger 24/08Blue smart ip22 charger 12/20Blue smart ip22 charger 24/12Blue smart ip22 charger 12/30Blue smart ip22 charger 24/16Blue smart ip22 charger 12/25

Inhaltsverzeichnis