Setting The Temperature - Dometic MC-Serie Montage- Und Bedienungsanleitung

Operation
7.6 Temperature values
I
NOTE
The temperature values are shown in °C. This cannot be changed.
The thermometer stores the values of the minimum and maximum inner temperature
since the last reset.
To reset these values:
➤ Press the
button for 5 seconds.
7.7

Setting the temperature

The refrigerator is equipped with an automatic temperature regulation function. The
temperature cannot be set.
7.8 Alarms
A
NOTICE!
• If you are not able to eliminate the problem triggering the alarm,
store the refrigerated goods somewhere else as soon as possible.
• In case of power failure, the inner temperature will raise in 2 hours
(hold over time) from 2 °C to 10 °C at an ambient temperature
of 25 °C.
There are five special cases when alarms occur:
Alarm event
Temperature out of range
Power failure
Inner fan is blocked
Door open for > 20 sec
Connection problem between
display and controller
Door open for > 60 sec
The alarm can be muted and unmuted:
➤ Press the
button.
20
Number of beeps
1 beep / 5 sec
1 beep / 3 sec
n.a.
1 beep / 2 sec
2 beeps / 2 sec
MC302, MC502
Duration of the beeps
1 sec
0.5 sec
permanent beeping
1 sec
0.5 sec
EN