Tracking Control - AVer DL10 Bedienungsanleitung

Tracking Control

Enable/disable tracking function, select tracking mode, and
operate one-click tracking function.
 Tracking mode (refer to
setup)
 Presenter: Camera will start tracking when object
enters the tracking point.
[Note] Tracking point under presenter mode: default
set is preset 1. When preset 1 is not set, tracking point
is home position.
 Zone: Camera will start tracking when object is moving
between the preset tracking block area.
Hybrid: With the advantages of both the Presenter

Mode and Zone Mode, the camera tracks and
captures the presenter's movement. As the presenter
enters the previously configured preset point zone, the
camera steers to focus on the content of the zone,
such as the whiteboard and the projector screen.
 Click Track: This function allows user to change tracking
object while auto tracking.
1. Select Click Track button. A red frame is targeted on the
tracking object and blue frames are targeted on other
objects on the live screen.
2. To select a new target, just simply click the object on the
live screen.
19
Tracking Settings section for