Camera Settings; Camera Control - AVer DL10 Bedienungsanleitung

Camera Settings

Camera Control

Select Settings (

You can navigate the camera to the desired angle with its PTZ function.

Auto Focus Modes:
. Find the two modes below in the AF Mode drop-down list.
Select
AF Trigger after PTZ (Default): After the camera pans, tilts, or zooms in/out, the auto

focus will be triggered once. This mode is suitable for scenarios where the presenter uses
gestures and body language but walks around only occasionally. The camera will auto
focus on the presenter only once after he/she stops walking, thus stabilizing the footage.
Continuous AF: The camera automatically maintains its focus on the presenter whenever

it detects any movement. This mode is widely used in cases where the presenter strolls
around the room, for it can firmly keep focus on the presenter optimally.

Select
to focus far.
One push focus: By clicking the

once.

You can adjust the Pan Speed of the camera with the slider.

You can adjust the Tilt Speed of the camera with the slider.

You can select High or Low for Zoom Speed.

You can select On or Off for Digital Zoom.
) > Camera Settings > Camera Control.
to switch to the manual focus. Click the minus sign to focus near and plus sign
button to adjust Lens focus automatically
27