Faq - AVer DL10 Bedienungsanleitung

FAQ

1. Can I pan, tilt, zoom, and set preset point when tracking is on?
Yes, but tracking will be off when activating pan/tilt/zoom or go to preset point.
2. Any value will be auto saved and shifted when going to the preset point?
Yes, preset point value: PTZ, exposure, shutter, ev, brightness, gain, slow shutter, white
balance, focus, focus position, digital zoom, R&B gain.
3. What value will be saved in profile?
Profile saving value: 1) preset setting values, 2) tracking mode, and 3) tracking setting values.
4. How to switch from Zone mode to Presenter mode?
You may switch to Presenter mode by simply pressing Upper or Full button on your remote
control.
5. Where can I configure the Hybrid Mode?
You can access the camera Web user interface to configure the Hybrid Mode. The Hybrid Mode
is not supported by the remote control.
6. What should I pay attention to when configuring the Effective Tracking Area under the Hybrid
Mode?
Effective Tracking Area defines where the presenter is tracked. When configuring the Effective
Tracking Area, include the preset point zone (Preset 10-13) as well.
7. Why can't I access the camera live view?
Instead of the camera live view, you might be seeing one of the following 2 pictures:

This picture indicates that the camera is in the privacy mode and you can exit the privacy mode
by lightly pressing the power button on the remote control.

This picture indicates that the camera is in the sleep mode and you can wake the camera up
by reconnecting to the UVC image of the camera. Or, you can go to Video & Audio < Video
Mode and select Stream Only or USB + Streaming to wake the camera up.
35