AVer DL10 Bedienungsanleitung Seite 34

2. Select the block and set the preset positions in order (preset 6 to preset 9). Use
, ,
the preset position. And, a snapshot of the preset image will show at corresponding image display
box. Repeat the steps to set another preset position.
[Notes]
 Set each preset overlapping with the next one (one man width).
 Set the preset view to clearly see at least 60% upper body of the presenter to ensure tracking
accuracy. Make sure no other human-outline poster/TV/monitor in the background.
3. Tracking Sensitivity: sets the sensitive level of tracking. Move bar to set the value. The current
value is displayed at upper right corner.
4. Time of Return to Tracking Point: sets the idle time for camera return to tracking point. Move bar
to set the value. The current value is displayed at upper right corner.
and to move the camera to desired position and select "Save" to save
24
, ,