AVer DL10 Bedienungsanleitung Seite 36

Secondly, determine how the camera tracks the presenter.

Tracking Sensitivity: sets the sensitivity level of tracking. Move bar to set the value. The current
value is displayed at upper right corner.

Time of Return to Tracking Point: sets the idle time for camera return to tracking point. Move
bar to set the value. The current value is displayed at upper right corner.

People Size: selects the people in full or upper body while tracking.
[Note] Tracking point under presenter mode: default set is preset 1. When preset 1 is not set,
tracking point is home position.

Once the Effective Tracking Area is enabled, the camera tracks the presenter only when
he/she is within the specified Effective Tracking Area. When configuring the Effective
Tracking Area, include Preset 10-13 in the Effective Tracking Area so that the camera tracks
to focus on the content of the preset point zone. For instance, in the case where Preset 10 is
excluded from the Effective Tracking Area, even if the presenter walks to the flat TV in Preset
10, the camera will not go to Preset 10 and will not show the content of the flat TV.

Auto Zoom: When auto zoom is off, the camera stops zooming in/out automatically and shoots
the presenter according to the shot size of the Preset you choose. Choose a Preset point in the
drop-down list.
26