AVer DL10 Bedienungsanleitung Seite 41

Network
Set up IP address of camera – DHCP or static IP, Hostname, Netmask, Gateway, and DNS. After
setting, select "Confirm" to apply settings.
RTMP Settings
Follow below steps to set up RTMP:
1. Get the RTMP server URL and stream key from the broadcasting platform and enter in "Server
URL" and "Stream Key" column.
2. Select "Start Stream" to begin uploading the live video of the camera to the broadcasting
platform.
3. Select "STOP" to stop uploading the video.
[Note] To get the RTMP server URL and stream key, please refer to the instruction of broadcasting.
RTSP Security for user to set a security key number for streaming.
Connecting to DL10 via RTSP
On your media applications such as VLC, PotPlayer, or QuickTime, you can connect to DL10 by
entering the following RTSP URL:
"rtsp://IP address of
For Example: rtsp://192.168.1.168/live_st1
You can enable/disable RTSP Security function.
(When RTSP Security is On, the RTSP stream ID and Password will be synchronized with those of
DL10 Web user interface.)
DL10/live_st1".
31