EN
5. Install the computer
Connect the heart rate measurement cable
(50) and the connecting cable from the top
of the handlebar column (18) to computer
cables (9).
Fix the computer (9) to the handlebar
column (2) using the bolts (55).
6. Install the water bottle holder
Install the water bottle holder (54) on the
handlebar column (2) using the bolt (65)
and the flat washer (66). Make sure the
holder is secure and insert the bottle.
Congratulations! You have assembled elliptical trainer!
Read the manual carefully before using the elliptical trainer.
ADJUSTMENTS
Resistance adjustment
In order to increase the resistance, turn the resistance knob clockwise. In order to decrease the
resistance, turn the resistance knob counterclockwise.
26