Zipro Shox RS Bedienungsanleitung Seite 23

EN
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with
the product.
Prepare sufficient space for the assembly operation. It is advisable to assemble the product with
another person because of the weight of some elements.
1. Install the front and rear base
Fix the rear (4) and front base (3)
to the main frame (1) using bolts
(12), curved washers (13), and nuts
M8 (14).
ATTENTION! Remove any plastic
or cardboard safety inserts before
assembly.
2. Install the cables and front
column.
Connect the connecting cable (18)
to the computer cable (20).
Next, connect the resistance
adjustment cable (19) to the other
connecting cable (18) as shown
in the picture.
23