Axis Q60 Series Installationsanleitung Seite 18

Page 18
4. To log in, enter the user name "root" in the dialog as requested.
Note: The default administrator user name root cannot be deleted.
5. Enter the password as set above, and click OK.
Note: If the password is lost, the camera must be reset to the factory default settings. See page 25.
6. AXIS Q6035: The capture mode must be set
the first time the camera is accessed. Select
the desired Capture Mode from the drop-
down list and click OK.
Note: The capture mode can be changed later
from the product's web pages, but this
will reset most other settings. For more
information, see the online help or the
User Manual.
AXIS Q6032/Q6034/Q6035 Installation Guide