Symbols; Technical Data; Application - Protool CHP 45 MAX Originalbetriebsanleitung

Rotary/chiseling hammer
CHP 45 MAX -
original instruction
Table of contents
1 Symbols ................................... 10
2 Technical data ........................... 10
3 Application ................................ 10
4 Description of the device ............. 11
5 Double insulation ....................... 11
6 General Safety Rules .................. 11
6.1 Work area ................................. 11
6.2 Electrical safety ......................... 11
6.3 Personal safety .......................... 11
6.4 Power tool use and care .............. 12
6.5 Service ..................................... 12
6.6 Emission levels .......................... 13
7 Putting into operation ................. 13
7.1 Supplementary handle assembly ... 13
7.2 Switching on / off ........................ 13
7.3 Rotation regulation ..................... 14
7.4 Function switch .......................... 14
7.5 Impact drilling ........................... 14
7.6 Chipping ................................... 14
7.7 Setting chisel position
for chipping ............................... 14
8 Inserting and removing bits ......... 14
8.1 Inserting bits ............................. 14
8.2 Removing bits ........................... 14
9 User's protection ........................ 14
9.1 Safety clutch ............................. 14
9.2 Antivibration extras
for the device ............................ 14
10 Tips for practice ......................... 15
11 Maintenance .............................. 15
12 Environmental Protection /
Disposal.................................... 15
13 Warranty .................................. 16
14 Declaration of Conformity ............ 16
10
GB
1

Symbols

Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Wear a dust mask!
Read the instructions
Not to be included in municipal refuse
Advice or tip
►
2

Technical data

Voltage
Frequency
Input power
No-load speed
Speed under load
Electronic speed control
No-load impact rate
Impact energy
Tool holder
Drilling to concrete
- max.
Full drill
Concerete core Cutter
Hollow core bit
Weight
Protection class
3

Application

Rotary/chiseling hammer is a versatile pow-
er tool intended for percussion drilling and
medium arduous chiseling to concrete, wall,
and stone. This rotary/chiseling hammer is
intended for professional use and may be
used only for above-mentioned purposes.
The user shall be liable for any damage
resulting from non-specifi ed use.
230 - 240 V
50 - 60 Hz
1100 W
0 - 600 min
-1
0 - 400 min
-1
•
0 - 3000 min
-1
10.0 J
SDS-max
45 mm
80 mm
100 mm
5.9 kg
II /