Panasonic CS-W14BB4P Bedienungsanleitung Seite 19

If the wireless remote control display is illuminated
Symptom
Indoor unit does not operate when a
button is pressed.
The unit does not cool or heat
properly.
If the CHECK display on the wired remote control display is flashing
Stop the indoor unit and check the conditions. After three minutes, start the operation again.
I If the display still flashing
Display
AIR SWING TIMER
CHECK
LOCAL MANUAL
OFF / ON
CZ-RD51P
AIR SWING TIMER
SELECT
SPEED
AUTO
MANUAL
SET
TEST RUN CLOCK CANCEL
CHECK
A/C No.
• The air conditioner No. "01" appears during normal
installation and use. When using group control, a different
number may appear.
All manuals and user guides at all-guides.com
Cause
• Is the remote control out of range of
the indoor unit's ray receiver?
• Does the address number match with
the setting of the indoor unit's ray
receiver ADDRESS SET switch?
• Check whether an appropriate
operation mode is selected?
• Is anything blocking the inlet or outlet
vents of indoor or outdoor unit?
• Is the air filter soiled or dusty?
• Check if doors or windows have been
opened and closed frequently, or
whether heat-operating equipment
such as gas stoves and irons are
being used in the same room.
OPE-
FAN
TEMP
SPEED RATION
MED
COOL
TEMP
FAN OPE-
RATION UP
DOWN
FILTER
A/C No.
RESET
Reference
Page 10.
Page 15.
Refer to page 17 for proper use details.
Remove any obstacles.
Refer to page 16 for maintenance
details.
Refer to page 17 for proper use details.
Press the CHECK button.
AIR TIMER
SWING
CHECK
LOCAL MANUAL
The timer display will change.
F15 ~ F49 will appear in place of the time. (The temperature
setting display will also change to show the air conditioner
number.)
(Example)
Please engage an authorized dealer for the malfunction
details.
– 18 –
OPE-
FAN
RATION TEMP
SPEED
MED
COOL