Product Description And Specifications - Bosch GOP 12V-28 Professional Originalbetriebsanleitung

An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. non-hardened nails, clamps). It
is also suitable for working on soft wall tiles and for dry sand-
ing and scraping of small areas. It is ideal for working close to
edges and flush with surfaces. The power tool must only be
operated using Bosch accessories.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Rechargeable battery release button
A)
(3) Rechargeable battery
(4) Ventilation slots
(5) Orbital stroke rate preselection thumbwheel
(6) Battery charge indicator
(7) Tool holder
(8) Clamping lever for depth stop
A)
(9) Depth stop
A)
(10) Plunge cut saw blade
(11) Clamping bolt
(12) Hex key
(13) Handle (insulated gripping surface)
A)
(14) Dust extraction system
A)
(15) Sanding plate
A)
(16) Sanding sheet
(17) Clamping lever for dust extraction system
A)
(18) Dust extraction outlet
A)
(19) Dust extraction adapter
Bosch Power Tools
(20) Dust extraction hose
A) Accessories shown or described are not included with the
Technical data
Cordless multi-cutter
Article number
Rated voltage
No-load speed n
Oscillation angle on left/right
Weight according to
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable battery GBA 12V
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.
Noise/Vibration Information
Noise emission values determined according
to EN 62841‑2‑4.
Typically, the A-weighted sound pressure level of the power
tool is 79 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
determined according to EN 62841‑2‑4:
Sanding: a
Cutting with plunge cut saw blade: a
A)
Cutting with segmential saw blade: a
K = 1.5 m/s
Scraping: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
A)
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
A)
product as standard. You can find the complete selection of
accessories in our accessories range.
min
0
C)
and
3.0Ah.
(triax vector sum) and uncertainty K
h
2 2
= 3 m/s , K = 1.5 m/s ,
h
= 9 m/s
h
h
2
,
2 2
= 8.5 m/s , K = 1.5 m/s
h
1 609 92A 5V6 | (20.08.2020)
English | 17
GOP 12V-28
3 601 HB5 0..
V= 12
−1 A)
5000−20000
° 1.4
B)
kg 1.0−1.2
°C 0 to +35
°C −20 to +50
GBA 12V...
GAL 12...
GAX 18...
2 2
, K = 1.5 m/s ,
2
= 2.5 m/s ,
.