Cleaning The Device; Safe Life; Change The Gas Enjector - CombiSteel 7478,0515 Bedienungs- Und Wartungsanleitung

10-02 Nut
10-01 Olive
10-03 Nozzle
12 Pipe
13 Olive
14 Nut
15 Termocouple
16 Piezoelectric
17 İgnition cable
18 Knob
19 label

12. CLEANING THE DEVICE

Device must be cleaned every day after use, after being sure that it is completely cooled down.
Cleaning must be made by a clean wet cloth by wiping the device. It is recommended that stainless steel surfaces should be wiped by inox
cleaners.
During cleaning, do not use sharp edged, cutting and drilling tools such as scraper, emery in no way.
Cleaning must not be done by spraying the water onto the device in no way.
13. INTERVENTION AFTER FAILURE
FAILURES / CAUSES
 There is no cooking.
 Be sure that the gas connection to the device has been made and there is gas flow to the device.
 Be sure that you have opened the right control valve.
 Be sure that you have fired up pilot fire.

14. SAFE LIFE

The safe life of the product is 10 years.

15. CHANGE THE GAS ENJECTOR

15.1 Main Burner
1) Remove the control panel by unscrew the secrews '2'.
3/8
3/8
M8
Pilot burner pipe
Ø4
Ø4
M9x1000
2.5 mm
2.5mm²x200mm
2
10/50