Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electrical connection
•
Have a specialist electrician make the electrical connection of the device. Commissioned person should have
knowledge about domestic network system and rules in your country.
•
Voltage 400 / 230 v / 50 Hz.
•
Connect feeder line circuit W – automatic fuse.
•
Make the earth connection to your device absolutely.
Cleaning and maintenance
•
Unplug the device and wait for becoming cold.
•
Open the lock on the control board (10) and divide the hinged body and make the cleaning through a brush.
•
Cleaning the bricks and stainless body through only soapy cloth.
•
Do not use any water, vapor and similar pressurized cleaning materials under any circumstances. These
materials damage the device.
•
Your regular cleaning assists you to use the device without any problem for long period.
Before applying to the authorized service
Problem:
It does not operate when power switch is
turned on.
Device does not make heating process.
There is an odor when heating starts.
Solution:
Check whether device is connected to the network and see
that yellow light is on
Bring the power switch into any level.
Protective oil on the heating resistances is evaporating. It
does not cause any problem.
www.combisteel.com
7
Werbung
Inhaltsverzeichnis
