JVC Natural Vision T-V LINK AV32T20EP Bedienungsanleitung Seite 6

Setting up your TV
• If the power lamp stays red and does
not change to green:
Your TV is in the standby mode. Press
the # (Standby) button on the remote
control to turn your TV on.
• The JVC logo does not appear when
your TV has been turned on once. In
this case, use the "LANGUAGE" and
"AUTO PROGRAM" functions to
make the initial settings. For details,
see "INSTALL" on page 26.
2 Press the a
The LANGUAGE menu appears.
3 Press the 5
choose ENGLISH. Then press the
a button a
a a
English is set for the on-screen display
description. The COUNTRY menu
appears as a sub-menu of the AUTO
PROGRAM function.
4 Press the 5
choose the country where you are
now located
4
a button a a
5 and 6 6 buttons to
5 5 6 6
5 and 6 6 buttons to
5 5 6 6
5 Press the blue button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically registered in the
Programme numbers (PR).
• To cancel the AUTO PROGRAM
function:
Press the b button.
After the TV channels have been
registered in the Programme
numbers (PR), the EDIT menu
appears
• You can proceed to edit the
Programme numbers (PR) using the
EDIT/MANUAL function. For details,
see "EDIT/MANUAL" on page 28.
• If you do not need to use the EDIT/
MANUAL function, go to the next
step.