Installation Precautions; Installation Location - Panasonic CZ-RTC6BL Installationsanleitung

● Install this remote controller vertically.
● When attaching this remote controller, be sure to use the supplied screws and confi rm
that remote controller is fi xed to the surface so that there are no gaps.
● The warranty does not cover the product if it falls from an elevated location.
● Please write down the model information, etc., in "Setting Information" in the
Operating Instructions when you install the remote controller.
● Requires a mobile device that is iOS/Android™ compatible.
● The End user should read and accept the Terms of use and Privacy Notice in the
contents of "Panasonic H&C Control App".
● Please avoid to set up multiple remote controller registrations at the same time.
● Users are responsible for all carrier costs associated with installing the
"Panasonic H&C Control App" on the mobile device.
● Panasonic Wired Remote Controller is designed for communication to the
"Panasonic H&C Control App".
● Third party Bluetooth
● Updates to the service may mean there are changes to the design of the
"Panasonic H&C Control App" screen and display.

Installation Precautions

Installation location

50 mm
50 mm
1 to
1.5 m
Floor
NOTE
interfaces cannot be connected to the "Panasonic H&C Control App".
®
 Install at the height of 1 to 1.5 m from the fl oor
(Location where average room temperature can be
detected).
 Keep a space around the remote controller as detailed
on the fi gure shown left.
50 mm
 Avoid the following locations for installation.
• In the shadow or backside of objects deviated from the
room airfl ow
• Location where condensation occurs (The remote
controller is not moisture proof or drip proof)
• Location near heat source
50 mm
 Keep distance of 1 m or more from the TV, radio and
PC. (Image blur or related noise may occur)
 Do not use in special environments.
Use in places with much oil (including machine oil),
steam, fl ammable or corrosive gas, voltage fl uctuation,
surrounding the metal body, may lead to severe
decrease in functionality and damage to parts.
5