Safety Instructions; Electrical Connection - JUNO JH070B2 Benutzerinformation

4
Do not use harsh abrasive cleaners or sharp metal
•
scrapers to clean the glass door since they can scratch the
surface, which may result in shattering of the glass.

SAFETY INSTRUCTIONS

Installation
WARNING! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the handle.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
• The kitchen cabinet and the recess
must have suitable dimensions.
• Keep the minimum distance from other
appliances and units.
• Before mounting the appliance, check if
the oven door opens without restraint. If
not the oven has to be lifted.
• Parts of the appliance carry current.
Close the appliance with furniture to
prevent touching the dangerous parts.
• The appliance is equipped with an
electric cooling system. It must be
operated with the electric power supply.
Cabinet minimum
height (Cabinet un‐
der the worktop mini‐
mum height)
Cabinet width
Cabinet depth
Height of the front of
the appliance
Height of the back of
the appliance
Before you install the appliance, fit it with
the applicable hob from the table.

Electrical connection

590 (600) mm
• All electrical connections should be
• The appliance must be earthed.
560 mm • Make sure that the parameters on the
550 (550) mm
598 mm
• Always use a correctly installed
579 mm
• Do not use multi-plug adapters and
Width of the front of
the appliance
Width of the back of
the appliance
Depth of the appli‐
ance
Built in depth of the
appliance
Depth with open
door
Ventilation opening
minimum size. Open‐
ing placed on the
bottom rear side
Mounting screws
Type
JKFN604F5
JKFN606F5
WARNING! Risk of fire and
electric shock.
made by a qualified electrician.
rating plate are compatible with the
electrical ratings of the mains power
supply.
shockproof socket.
extension cables.
594 mm
558 mm
561 mm
540 mm
1007 mm
560x20 mm
4x25 mm
Maximum power
6000 W
7600 W