JUNO JH070B2 Benutzerinformation Seite 17

Step 3 Close the oven door halfway
to the first opening position.
Then lift and pull forward and
remove the door from its seat.
Step 5 Turn the fasteners by 90° and
remove them from their seats.
Step 7 Clean the glass panels with water and soap. Dry the glass panels carefully. Do not
clean the glass panels in the dishwasher.
Step 8 After cleaning, install the glass panel and the oven door.
When installed correctly the door trim
clicks.
Make sure that you install the internal glass
panel in the seats correctly.
90°
Step 4 Put the door on a soft cloth on
a stable surface and release
the locking system to remove
the internal glass panel.
Step 6 First lift carefully and then re‐
move the glass panel.
1
17
2
A