Setting Up The Rinsing Program - KKT KOLBE GS452VI Benutzerhandbuch

Rinsing programs
The Washing program „ECO" is „medium" for the flushing of
!
the suitable soiled dishes and most efficient in terms of com-
bined energy and water consumption.
The fair values of the washing program are a guideline only. Cir-
cumstances that are not dependent on the device, for example
the temperature of the supplied water, the water pressure, etc.,
may affect the overall duration of the wash cycle.
* Default program, according to the test cycle.

4.1 Setting up the rinsing program

Make sure that notes from the first section have been complied
with „before first use".
1. Check the level of the rinse aid and salt.
2. Draw out the lower and upper basket and load the dishes.
See instructions for loading the dishwasher baskets.
Push the lower and upper baskets back into position.
3. Pour in the detergent (see the section entitled „Salt, Detergent
and Rinse Aid").
4. Switch the appliance on by pressing the On/off switch.
5. Open the door, press the power button, and the light will turn on.
6. Press the P-button and select a program.
The icon of the selected program is displayed.
7. Close the door.
8. The dishwasher begins to work.
58