Using the dishwasher
3.4 Filling the rinse aid dispenser
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
• This appliance has been designed for the use of liquid rinse
aids.
• The dosage of the rinse aid is on the inside of the tiltable door,
next to the Chamber of the dosage of dishwasher tablets.
• To make the rinse aid reservoir of accessible, turn the cap
counterclockwise, the cap is thus loosened from the filling
opening (1). Pour slowly the liquid rinse aid (2); the capacity
of the reservoir is about 110 ml
• You should pour in the rinse aid slowly until the level indicator
is completely black.
• You should not overfill the reservoir, it could cause the selec-
ted wash program for excessive foaming. Wipe off the remains
of the rinse aid with a damp cloth.
• Unscrew the cap clockwise back again until it locks into po-
sition (3).
• The size of the black dot of the rinse aid indicator changes
according to the filling level, as shown below.
• Important: Even if you use detergent tablets 3 in 1, it is neces-
sary to constantly refill rinse aid into the reservoir.
If there is no rinse-aid warning light on the control panel,
you can judge the amount of rinse-aid by the color of the opti-
cal level indicator „D" located next to the cap.
When the rinse-aid container is full, the whole indicator will
be dark. As the rinse aid diminishes, the size of the dark dot
decreases.
48
Rinse Aid
indicator
Full
3/4 full
1/2 full
1/4 full - Should refill to
eleminate spotting
Empty