Rear Panel - Sony Trinitron SSM-14L1 Bedienungsanleitung

Rear Panel

1 -AC IN socket
Connect the supplied AC power cord to this socket and
then to a wall outlet.
2 PARALLEL REMOTE terminal (8-pin modular
connector)
Forms a parallel switch and controls the monitor
externally.
For details on the pin assignment, see page 13 (GB).
LINE A
Y/C VIDEO AUDIO
IN IN IN
OUT OUT OUT
3
LINE B
PARALLEL
REMOTE
VIDEO AUDIO
IN IN
Y/C
IN
4 2
(The
3 LINE A connectors
Line input connectors for Y/C separate, composite
video and audio signals and their loop-through output
connectors.
Press the LINE A button on the control panel to
monitor the input signal through these connectors.
If you input signals to both Y/C IN and VIDEO IN, the
signal input to the Y/C IN is selected.
Y/C IN/OUT (4-pin mini-DIN)
These are the input/output connectors for a Y/C
separate signal. Connect them to the Y/C separate
input/output connectors on equipment such as a
VCR, video camera, or another monitor.
VIDEO IN/OUT (BNC)
These are the input/output connectors for a
composite video signal. Connect them to the
composite video input/output connectors on
equipment such as a VCR, video camera, or another
monitor.
AUDIO IN/OUT (phono jack)
These are the input/output jacks for an audio signal.
Connect them to the audio input/output jacks on
equipment such as a VCR.
~ AC IN
1
mark indicates automatic termination.)
7
(GB)