Preparing For Installation - Sentiotec PANORAMA SMALL Montageanleitung

Assembly instructions
EN
Element sauna
PANORAMA
SMALL
Cabin size:
Incl. rim:
Interior dimension:
Wall thickness:

Preparing for installation

Read these assembly instructions carefully and keep them within reach when using the
sauna so that you can look up product information at any time.
These assembly instructions can also be found in the downloads section of our
website: www.sentiotec.com/downloads.
Attention!
The electrical connection may only be performed by a qualified electrician or
similarly qualified person.
Important note:
● Before you begin work, check the parts list to ensure that all the individual parts have
been delivered. If you discover any missing parts, notify your dealer within 14 days
of receiving the sauna cabin.
● The room that the sauna is installed in must be dry and ensure an appropriate amount
of air circulation.
● The floor must be level and even, preferably a stone or tiled floor.
● A minimum room height of 230 cm is required for the cabin installation work.
● A distance of at least 5 cm from the wall must be maintained.
● The inside of the wooden parts used must not be handled with any impregnating
material.
● You need an assistant for the installation.
02
209 x 158 x 201 cm
213 x 160 x 201 cm
196 x 155 x 198 cm
64 mm
Symbol photo