17.6 Cleaning The Spark Plug; Transport; Transport Over Shorter Distances; Lifting And Transporting With Separate Devices - Zipper Maschinen ZI-RPE330G Betriebsanleitung

17.6 Cleaning the spark plug
1. Pull out the spark plug cap and remove impurities from the outside of the spark plug.
2. Unscrew the spark plug using the spark plug wrench.
3. Check the ceramic insulation, clean the electrodes (metal tips) and check the distance
between the contacts. It should be 0.7 to 0.8 mm.
4. Reinstall the cleaned (or replaced) spark plug and replace the spark plug cap.
18

TRANSPORT

Never lift or transport the machine with the engine running!
18.1

Transport over shorter distances

For transport over short distances, use the hand holder and the mounted transport
wheels:
1. place the transport device in the hole on the base plate.
2. place the machine on the transport device.
3. move machine with handle and transport device
Move the machine only on level and firm ground!
18.2

Lifting and transporting with separate devices

There are two persons required to lift and park the machine on another
transporting devices. - one person to operate the hoist and one person to keep the
machine in balance..
1. fold the handle forward as far as possible for transport over longer distances.
2. make sure that the lifting device including accessories is suitable for loads greater than the
weight of the machine.
3. check the welding connection on the lifting frame and the fixing of the lifting frame before
lifting.
4. first lift the machine only a few centimetres to check the lifting capacity.
5. then lift the machine as gently as possible to the desired position.
6. secure the load properly for transport
19 STORAGE
If the machine is not used for a longer period of time (>30 days):
1. Empty the oil tanks or fuel tank.
2. Remove the spark plug and pour a few drops of engine oil into the cylinder. Using a
rope starter, turn the engine a few times so that the oil is well distributed inside the
cylinder. Clean the spark plug and replace it.
3. Cover the cooled machine and store it out of the reach of children and unauthorised
persons in a well-ventilated, dry and frost-free environment.
20

DISPOSAL

Do not dispose of your machine in residual waste. Contact your local authorities for
information on available disposal options. If you buy a new vibratory plate or equivalent
from your dealer, he is obliged in certain countries to dispose of your old machine
properly.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RPE330G
W A R N U N G
H I N W E I S
TRANSPORT
32