Motion CM-07 Handbuch Seite 21

18 Single select 15 channel remote
Single select makes it possible to activate program mode on a single blind through a
remote control, without having to physically press the program button on the blind.
To activate Single
18.1
select, simultaneously
hold the centre
button and press the
pair button.
Once a blind is found,
18.3
the channel number
will flash and the
blind starts stepping,
indicating that
program mode has
been activated. The
blind can now be (un)
paired to the remote
and/or programmed.
M OT I ON C M - 0 7 DC M I D M O TO R
1
+
1
To search for
18.4
the next blind,
press the right
button. Search
mode will be
activated.
To find the
previous blind,
press the left
button.
The remote starts
18.2
searching for blinds
(search mode). This
is indicated by the
horizontal bars on the
remote.
To exit Single
18.5
select, press
the right
button during
search mode.
The display
shows the
letter O.