Inhaltsverzeichnis
Werbung
2-2 (Solid concrete or concrete block) Mark the wall and drill pilot holes
For assistance in determining wall plate location, see Height Finder at sanus.com.
See step 2-1 before performing this step.
Level the wall plate template [27] and mark the hole locations.
CAUTION:
Avoid potential injuries or property damage!
Mount the wall plate [01] directly onto the concrete surface
Minimum solid concrete thickness: 203mm (8 in.)
Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
Minimum horizontal space between fasteners: 406 mm (16 in.)
Pilot holes MUST be drilled to a depth of 75 mm (3 in.) using a 10 mm (3/8 in.) diameter drill bit
Never drill into the mortar between blocks
75 mm
(3 in.)
[27]
10 mm
(3/8 in.)
11
Werbung
Inhaltsverzeichnis
