Zipro Drift Bedienungsanleitung Seite 23

EN
4. Install the handlebar post
Connect the computer cable (17) to the computer
connecting cable (18) and the resistance adjustment
cable (16) to the other connecting cable (16) as shown
below.
Slide the nut of the upper resistance adjustment
16
cable (16) into the slot in the post of the lower
18
resistance adjustment cable (16), pull and tighten
the upper cable (16) and move the lower cable
post (16) vertically. Cable nut should be on the
post as shown in the picture.
Insert the handlebar post (4) into the main frame
(1) and fix it with bolts (19) and curved washers
17 16
(35).
5. Install the handlebar
Take computer cables out from the upper part of the
handlebar post (4).
Fix the handlebar (5) to the handlebar post (4) using
spring washers (25), flat washers (33) and bolts (26).
Fix the handlebar cover (27) onto the handlebar post
(4).
23