Troubleshooting - Blaupunkt 5CL2-Serie Gebrauchsanleitung

en Troubleshooting

Troubleshooting

12 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting light up.
The LED lighting does
not work.
The base of the refri-
gerator compartment
is wet.
The temperature dif-
fers greatly from the
setting.
The appliance hums,
bubbles, buzzes,
gargles or clicks.
The appliance makes
noises.
36
Cause and troubleshooting
Showroom mode is switched on.
Carry out the appliance self-test. → Page 38
▶
Once the appliance self-test has ended, the appli-
a
ance switches to normal operation.
Different causes are possible.
Call customer service.
▶
The customer service number can be found in the
enclosed customer service directory.
The condensation channel or drainage hole are
blocked.
Clean the condensation channel and the drainage
▶
hole. → Page 35
Different causes are possible.
Switch off the appliance. → Page 32
1.
Switch the appliance back on after five minutes.
2.
→ Page 32
If the temperature is too warm, check the temper-
‒
ature again after a couple of hours.
If the temperature is too cold, check the temper-
‒
ature again on the following day.
Not a fault. A motor is running, e.g. refrigerating unit,
fan. Refrigerant flows through the pipes. The motor,
switches or solenoid valves are switching on or off.
No action required.
Fittings wobble or stick.
Check the removable fittings and, if required, re-
▶
place these.