Setting The Temperature - hanseatic HSBS17990WEHFBK Gebrauchsanleitung

Page EN-14 Operation
the symbol (23) will flash. The control panel
is locked.
The DISPENSER button (25) is not affected
by the locking function.
Unlocking
• Press and hold the LOCK/UNLOCK but-
ton (22) for 3 seconds.
The symbol lights up and a beep
sounds. The control panel buttons are now
released.
Locking
• Press and hold the LOCK/UNLOCK but-
ton (22) for 3 seconds.
You will hear a beeping sound and the
symbol will appear on the display.
If no button is pressed for 30 seconds,
the control panel will lock automati-
cally.

Setting the temperature

The appliance may not operate proper-
ly if the ambient temperature exceeds
or falls below the specified temperature
range for a prolonged period. This can
then lead to an increase in temperature
inside the appliance.
■ Always ensure the prescribed am-
bient temperature is maintained
(see "Intended use" on page EN-6).
If you set a lower temperature, you will
need higher cooling performance. This
increases the energy consumption.
Using the buttons FRZ.TEMP. (16) and REF.
TEMP (21), you can set the temperature in
the freezer and in the fridge independently of
one another.
• First select a medium setting.
• If, for example in summer, the ambient
temperature increases, select a lower set-
ting accordingly.
Freezer
(16)
MODE
1. Press the FRZ.TEMP. button (16) once.
The symbol (17) will flash.
2. Press the FRZ.TEMP. button enough
times until the desired temperature is dis-
played. Once the indicator stays illuminat-
ed, the temperature has been set.
The following temperatures are available:
The ideal temperature for the freezer is −18 °C.
Fridge
(20)
QUICK FRZ
QUICK REF
1. Press the REF.TEMP. button (21) once.
The symbol (20) will flash.
2. Press the REF.TEMP. button enough
times until the temperature is displayed.
Once the indicator stays illuminated, the
temperature has been set.
(17)
QUICK FRZ
QUICK REF
(21)