Preliminary Notes - FRIATEC VACUSET XL Bedienungsanleitung

Contents
1.

Preliminary notes

1.1 Safety notes and hints
1.2 Designated use
2. Safety
2.1 Safety notes
2.2 Obligations of the operator
2.3 Structural changes
3. Scope of delivery
3.1 Use of a vacuum pump
4. Preparation of fusion
5. Assembly
5.1 Assembly of the plunger (only for FRIALEN spigot saddle SA-XL)
5.2 Assembly of the vacuum clamping unit
6. Carrying out of fusion
7. Disassembly
8. Tapping and commissioning (only for FRIALEN spigot saddle SA-XL)
9. Notes on care and maintenance
10. Warranty
11. Update of these operating instructions
1. Preliminary notes
1.1 Safety notes and hints
In these operating instructions, the following symbols with warnings are used:
DANGER!
Characterises a threatening danger!
There is danger of serious health damages and damages to property if these
notes are disregarded.
WARNING!
Characterises a hazardous situation!
There is danger of minor injuries or damages to property if these notes are
disregarded.
IMPORTANT!
Characterises application hints and other useful information.
2
Page
2
2
3
3
3
3
4
4
6
6
6
6
7
11
12
12
13
14
14