First Step - Kenwood KDC-BT60U Kurzanleitung

First step

Exit Demonstration Mode
Turn off the demonstration mode
when you use it for the first time after
installation.
1
Press the [VOL] knob to quit the
demonstration mode when the
messages "To Cancel Demo Press the
volume knob" are displayed (approx. 15
seconds).
2
Turn the [VOL] knob to select "YES", and
then press the [VOL] knob.
The demonstration mode can also be
canceled in the Menu List mode.
Refer to <Demonstration mode Setting>
(page 35) of Instruction manual.
4 | Quick Start Guide
[MENU]
[ 4 ] [ ¢ ]
[VOL]
Adjusting the Date
1
Press the [MENU] button to enter the
Menu List mode.
2
The item can be selected and
determined as follows.
➜
"Settings" "Clock & Date"
Adjust"
To select the item, turn the [VOL] knob.
To determine the item, press the [VOL]
knob.
3
Press [4] or [¢] button to select
year, month, or date to set.
4
Turn the [VOL] knob to adjust the year,
month, and date.
5
Press the [MENU] button to finish the
date adjusting.
6
Turn the [VOL] knob to select "Date
Mode select", and then press the [VOL]
knob.
7
Turn the [VOL] knob to select Date
format, and then press the [VOL] knob.
8
Press the [MENU] knob for at least 1
second, and then press it again briefly to
exit the Menu List mode.
➜
"Date