Velleman CAMIP10 Bedienungsanleitung Seite 87

CAMIP10 – addendum
6. UPNP auto port forwarding
The new firmware has an improved UPNP function, enabling automatic port forwarding.
Notes:
• Both the router and camera must support UPNP function and have it enabled.
• Do not use port 80 for the camera.
7. Alarm range
• If you want the camera to activate alarm during preset time periods, check
Scheduler and set the time range.
• To select a serial area, click any number between 00 and 23 on the first row – the
selected column will turn blue.
E.g. click on column "06" on the first row (Set); the column turns blue. This
means that the camera will trigger an alarm when motion is detected between 6
and 7 o'clock every day. To clear the column, click on the "06" in the second row
(Clear).
• To select/clear individual time blocks, click on them with the left mouse button.
Note: selected (active) time blocks turn blue.
12.12.2011
5
©Velleman nv
ref. 00
• Click "set All" to select all time blocks; click "clear all" to deselect everything.
• Click "Submit" to save the time schedule.
8. Filename function under FTP
• You can set a name for the uploaded image when you enable the checkbox. Enter the
desired name for the file in the "Filename" field.
Note: this filename is different from the alarm image. The name of the alarm image
can not be changed.
9. Turn off alarm beep
12.12.2011
CAMIP10 – addendum
6
ref. 00
©Velleman nv