Inhaltsverzeichnis
Werbung
GB
IMPACT DRILL
The numbers in the following text correspond
with the pictures at page 2 - 3.
Carefully read this manual before using
the machine. Make sure that you know
how the machine functions and how to
operate it. Maintain the machine in
accordance with the instructions to
make sure it functions properly. Keep
this manual and the enclosed
documentation with the machine.
Introduction
The machine is intended for impact drilling in
materials as brick and concrete. Besides it can
be used for drilling holes in wood, metal and
plastics.
Contents
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
Technical specifications
Voltage
230 V
Frequency
50 Hz
Power input
500 W
No load speed/min
0-2600
Impact rate
0-41600/min
Max. drill diameter (Wood)
25 mm
Max. drill diameter (Concrete) 13 mm
Max. drill diameter (Steel)
10 mm
Weight
2.3 kg
Lpa (sound pressure)
93.3 dB(A)
Lwa (sound power)
106.3 dB(A)
Vibration value
15.348 m/s
Features
Fig.A
1. Depth gauge
2. Chuck
3. Switch for normal and percussion drilling
4. Side handle
5. Left/right switch
6. On/off switch with speed control
04
7. Switch lock
Contents of packing
1 Impact drill
1 Side handle
1 Depth gauge
1 Users manual
1 Safety instructions
1 Warranty card
Check the machine, loose parts and accessories
for transport damage.
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the
following symbols are used:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Variable speed control
Wear protective gloves
Wear a dust mask. Working with wood,
metals and other materials may
produce dust that is harmful to health.
Do not work with material containing
asbestos!
Wear ear and eye protection
Before operating the machine:
•
Check the following:
2
•
Do the voltage of the machine correspond
with the mains voltage
•
Are the mains lead and the mains plug in a
good condition.
•
Do not use extension cables which are too
long. Use extension cables with a core
diameter of 1.5 mm
2
minimal and only when
the cable is rolled out completely.
•
In case of a blockage, switch of the machine
immediately.
Ferm
Ferm
GB
41
Werbung
Inhaltsverzeichnis
