Zoom Menu; Menu Position Menu; Input Sensing Menu - Sony SDM-S205 Serie Bedienungsanleitung

settings may have to be repeated if you change the input signal
after reconnecting your computer.
Items Features
AUTO Make the appropriate adjustments of the
screen's phase, pitch and horizontal/
vertical position for the current input
signal and save them.
x Adjust the picture's sharpness and position
manually (PHASE/PITCH/H CENTER/V CENTER)
You can adjust the picture's sharpness and position as follows.
1
Set the resolution to 1600 × 1200, on the computer.
2
Load the CD-ROM.
3
Start the CD-ROM and display the test pattern.
For Windows User
When Auto run operates:
1 Click "DISPLAY ADJUSTMENT TOOL (UTILITY)."
2 Click "Adjust" and confirm the resolution and then click
"Next."
Test pattern for PITCH, PHASE, H CENTER and V
CENTER appears in order.
When Auto run fails to operate:
1 Open "My Computer" and right click the CD-ROM icon.
Go to "Explorer" and open the CD-ROM icon.
2 Open [Utility] and then select [Windows].
3 Start [Win_Utility.exe].
Test pattern appears.
For Macintosh user
1 Open [Utility] and then select [Mac].
2 Start [Mac_Utility.exe].
Test pattern appears.
Items Press the m/M buttons
PHASE Minimize the horizontal stripes on the
screen.
PITCH Vertical stripes become vanished.
H CENTER Adjust the picture position when your
picture does not appear on the center of
V CENTER
the screen.

ZOOM menu

Items Features
FULL The input signal is displayed on the
screen in full, irrespective of the
picture's mode or resolution.
ASPECT KEEP The input signal is displayed on the
screen at its actual aspect ratio.
Therefore, black bands may appear at the
top and bottom of the picture, depending
on the signal.
REAL The input signal is displayed on the
screen at its actual resolution. Sub-1600
× 1200 signals are displayed at the center
of the screen surrounded by a black
frame.
Note
You cannot use this feature when the signal at resolution is 1600
× 1200. The picture is displayed on the screen in full.

MENU POSITION menu

Items Press the m/M buttons
MENU POSITION You can change the menu displayed
position on the screen. You can choose
one of 9 positions.

INPUT SENSING menu

You can search any input signals, switching the signals back and
forth automatically.
Items Features
AUTO ON When the selected input has no signal, or
when you select an input with the OK
button and if it has no input signal, an
on-screen message appears (page 19).
Then the display checks the input signal
and switch to other input automatically.
When an input is changed, the selected
input is displayed on the upper left
corner of the screen.
When there still is no input signal, the
display goes into the power saving mode.
INPUT 1 When turning on the display, INPUT1 or
INPUT2 will be displayed as priority
setting (INPUT SENSING will not
INPUT 2
function).
AUTO OFF The input is not changed automatically.
Press the OK button to change the input.
16