Herunterladen Inhalt Inhalt Diese Seite drucken

Ferm CDM1040 Gebrauchsanweisung Seite 11

Inhaltsverzeichnis

Werbung

ACCUSLAGBOREMASKINE
Numrene i den nedenstående tekst henviser til illustrationerne på side 2 - 3.
For din egen og andres sikkerhed anbefaler vi at du læser denne brugsanvisning
nøje igennem, før maskinen tages i brug. Opbevar denne brugsanvisning og den
øvrige dokumentation ved maskinen.
Indhold
1.
Maskindata
2.
Sikkerhedsinstruktioner
3.
Montering af tilbehør
4.
Funktion
5.
Service & vedligeholdelse
1. MASKINDATA
Tekniske specifikationer
Spænding
Spænding akkulader
Frekvens akkulader
Kapacitet akkumulator.
Opladningstid
N
Antal omdrejninger, ubelastet
Antal slag, ubelastet
Max. borediameter (træ)
DK
Max. borediameter (beton)
Max. borediameter (stål)
Vægt (incl. 1 Akkumulator)
Lpa (lydtryk)
Lwa (lydeffekt)
Vibrationsværdi
Pakkens indhold
1
Accu boremaskine
1
Batterie
1
Batterilader
2
Tilbehør
1
Kuffert
1
Brugsanvisning
1
Garantibevis
1
Sikkerhedsinstruktioner
Kontroller maskinen og tilbehør for transportskader.
90
| 24 V — ---
| 230 V~
| 50 Hz
| 1.5 Ah (NiCd)
| 100 min
| 0-500/min / 0-1400/min
|
0-8000/min / 0-22400/min
| 30mm
| 15mm
| 13mm
| 2.5 kg
| 87.7 dB(A)
| 100.7 dB(A)
| 18.0 m/s
2
Ferm
Faults
Should a fault occur, e.g. after wear of a part, please contact the service address on the
warranty card. In the back of this manual you find an exploded view showing the parts that can
be ordered.
Environment
To prevent damage during transport, the appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore please make use of options for recycling the
packaging.
NiCd cells are recyclable.
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Warranty
The guarantee conditions can be found on the separately enclosed guarantee card.
CE DECLARATION OF CONFORMITY (UK)
We declare under our sole responsibility that this product is in conformity
with the following standards or standardized documents:
EN50260-1, EN50260-2-1, EN50260-2-2, EN55014-1, EN55014-2,
EN60335-1, EN60335-2-29, EN61000-3-2, EN61000-3-3.
in accordance with the regulations:
98/37/EEC, 73/23/EEC, 89/336/EEC
from 01-12-2005
ZWOLLE NL
W. Kamphof
Quality department
It is our policy to continuously improve our products and we therefore reserve the right to
change the product specification without prior notice.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • The Netherlands
Ferm
UK
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fdc 2400i

Inhaltsverzeichnis