DJI AGRAS T10 Kurzanleitung Seite 6

Using the T10
1. Preparing the Intelligent Flight Battery
Only use the official DJI flight batteries listed below. Check the battery level before
flying and charge it according to the instructions in the corresponding manual
documents.
● T10 Intelligent Flight Battery BAX501-9500mAh-51.8V (recommended)
T20 Intelligent Flight Battery AB3-18000mAh-51.8V
●
T16 Intelligent Flight Battery AB2-17500mAh-51.8V
●
2. Preparing the Aircraft
M2
Unfold the M1 and M2 arms, and fasten the two arm locks.
Avoid pinching fingers.
Unfold the propeller blades.
Make sure that the battery is firmly inserted into the aircraft. Only insert or remove the battery when the aircraft
●
is powered off.
To remove the battery, press and hold the clamp and lift the battery up.
●
Fold the M3 and M4 arms followed by the M1 and M2 arms and make sure that the arms are inserted into the
●
storage clamps on both sides of the aircraft. Otherwise, the arms may be damaged.
M2
M1
M3
Unfold the M3 and M4 arms, and fasten the two arm locks.
Avoid pinching fingers.
Insert the Intelligent Flight Battery into the aircraft until you
hear a click.
M1
M4
5