Connections; Connecting A Camera, Monitor And Microphone; Connecting A Switcher - Sony SVT-S3050P Bedienungsanleitung

Connections

Turn all the power off before making connections.
Connect the AC power cord last.
Connecting a Camera, Monitor
and Microphone
With the following connections, you can monitor the
picture and sound.
Microphone
to MIC IN
to VIDEO IN
to video output
Video camera
Use of BNC connector
Align pin with cutout, insert and
turn right to lock.
To remove, turn left and pull out.
Note
If video equipment (video camera, etc.) is connected to
both VIDEO IN and S-VIDEO IN jacks, the unit that
is connected to the S-VIDEO IN jack has a priority.
To connect an alarm sensor
Refer to page 25.
8
to AC IN
to VIDEO
OUT
to a wall
outlet
to video
input
Monitor

Connecting a Switcher

to SW OUT
Video camera
to EXT
TIMING
IN
Camera switcher
Note
When you connect several cameras to a switcher,
synchronize the cameras.
If not, the picture will be disturbed.
to VIDEO IN
to MONITOR OUT