Product Description And Specifications; Technical Data; Noise/Vibration Information - Bosch GBM 13 HRE Professional Originalbetriebsanleitung

OBJ_BUCH-53-004.book Page 12 Monday, September 26, 2011 11:40 AM
12 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic. Machines with electronic control and right and
left rotation are also suitable for screwdriving and tapping.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Key type drill chuck
2 Rotational direction switch
3 On/Off switch
4 Lock-on button for On/Off switch
5 Auxiliary handle (insulated gripping surface)
6 Chuck key
7 Handle (insulated gripping surface)
8 Screwdriver bit*
9 Universal bit holder*
10 Securing screw for key type drill chuck
11 Allen key*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Rotary drill
Article number
Rated power input
Output power
No-load speed
Rotational speed under load,
max.
Rated torque
Spindle collar dia.
Max. drilling dia.
– Steel
– Wood
– Aluminium
Chuck clamping range
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
1 619 929 J60 | (26.9.11)
Rotary drill
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 84 dB(A); Sound power level 95 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Drilling into metal: a
Screwdriving: a
Tapping: a
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
GBM 13 HRE
accessories, keep hands warm, organise work patterns.
Professional
0 601 049 6..
Declaration of Conformity
W 550
We declare under our sole responsibility that the product de-
W 285
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
-1
min 0 – 550
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
-1
min 450
Technical file (2006/42/EC) at:
Nm 5
Robert Bosch GmbH, PT/ETM9,
mm 43
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
mm 13
Senior Vice President
mm 40
Engineering
mm 20
mm 1.5 – 13
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
01.09.2011
kg
(triax vector sum) and uncertainty K
h
2
=3.5 m/s , K=1.5 m/s
h
2 2
<2.5 m/s , K=1.5 m/s ,
h
2 2
<2.5 m/s , K=1.5 m/s .
h
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
GBM 13 HRE
Professional
2.1
/II
2
,
Bosch Power Tools