Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Display:
To check the daily profile set up without the risk of modification or
deletion:
Select the mode
DT2-IK: Select the channel
The first step of Monday is displayed as well as the daily profile.
Two options available for display:
1. Pressing repeatedly
In this case only the first daily step is displayed as well as the daily
profile.
2. Pressing enter: all steps of each day appear one after the other.
Modification or clearing of a program step: prog modif
Select the prog mode with
DT2-IK: Select the channel
Select the modif mode with
Validate with enter.
The number of remaining program steps appears for a short time.
The first step of the first day or group of days appears.
Repeatedly pressing the
time.
Any flashing field (state, hour, minutes) may be modified using
then validated with enter.
When the cursor is positioned on ok located behind the group of days, you
may display successively the days or the groups of days and switch directly
to the one that has to be modified using
To remove a program step: select the state of the channel (On, Off or
press simultaneously
Clear.appears on the screen.
Validate with enter.
Key
(only ref. DT1-K and DT2-K)
As soon as the key appears on the switch
Two types of operation:
using
menu
and enter.
(C1
or C2) using
+
or -: lets you shift days.
menu
and press enter.
(C1
or C2) using
+
or -.
enter
key displays all programmed steps one at a
+
and -.
+
or
-
and enter.
+
or
-
and press enter.
+
or -.
appear on the screen.
6
+
or
-
,
),
Werbung
