Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Holidays
Allows you to override the output, On or Off for a given period.
Once done, this override will be removed and will not be carried over to the
following year.
Select the mode
DT2-IK : Select the channel
With
+
or -, select the state of override: On or Off,
Enter the day then the month of the starting period (date 1) using
enter.
Enter in the same way the day and the month of the ending period (date 2).
In auto mode,
programmed.
becomes permanent during the period.
The override will be effective at 0:00 of the 1st date until 23:59 from the 2nd
date.
If date 1 is set before the day of programming, the period of holidays is valid
for the following year.
To clear a period of holidays return to the mode, press simultaneously the
and
-
keys.
Clear appears. Confirm with enter.
Override - waivers - Random operation
DT1-IK, DT1-IK/24V, DT1-IK/DCF: Pressing repeatedly on
DT2-IK: Pressing repeatedly on C1
If the state of the output is On:
st
1
pressure: temporary waiver. Off and
will let you return to the automatic mode.
nd
2
pressure: permanent override. On and
This override must be cancelled manually.
rd
3
pressure: permanent override. Off and
This override must be cancelled manually.
th
4
pressure: random operation. Simulation of presence:
the state of the output are displayed. Must be cancelled
manually. In this case the steps of the program are shifted
randomly within a range of ± 59 min.
th
5
pressure: return to the automatic mode.
using
menu
then enter.
(C1
or C2) using
flashes to indicate that a period of holidays was
+
or
-
and enter.
enter
or C2
.
flash. The next program step
are permanent.
are permanent.
9
to validate.
+
or
-
then
-.
, as well as
+
Werbung
