Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Time is set manually.
DT1-IK, DT1-IK/24V, DT1-IK/DCF, DT2-IK:
Select the mode
Modify the day, month, year, the hour and the minutes using
The time switch next suggests the winter / summer time changes
Select the type of change desired using
Validate with enter.
The type of change depends on the geographical zone.
Types available:
Type
Start of time
change Summer
Euro
Last Sunday
*
of March
USER
Date freely
programmed
No
No
change
The change always takes place between 2:00 and 3:00 a.m.
Note:
For United Kingdom, use the geographical area Euro.
For USA, use the type USER and enter following dates:
Beginning of the summer-time 2nd Sunday of Mars, beginning of winter-time
the 1st Sunday of November.
Example: for an installation in 2007 enter 11.03 and 04.11 by following the
instructions below.
When the USER type is selected:
1. Enter the day then the month of the date of change of the summer time
(+ 1hour) with
2. Enter the day then the month of the date of change of the winter time
(- 1hour) with
The time switch will check which days of which weeks correspond to these
dates and will apply changes to the same periods for the following
years independently of the date.
with
menu
+
or
-
and enter.
+
or
-
and enter.
then enter.
+
or -.
( * = type according defect)
Start of time
change Winter
Last Sunday
of October
Date freely
programmed
No
change
8
+
or
-
and enter.
Zone of
application
European
Union
.
Werbung
