ELRO BABY MONITOR ROYALE Bedienungsanleitung Seite 9

7 Fill in a name for the camera and 000000 at "Password", then press "OK".
8 The camera will now be online and the live view can be watched.
9 You will be asked to change the unsafe password '000000', select "OK". Fill the old and new
password and select "OK". The new password should contain at least 6 characters, one
uppercase letter, one lowercase letter, one digit and one special character (choose from:
~`@#$%^*()_-+=|{}[].?/).
10 Go to camera settings.
11 Select "Wi-Fi setting" to change the Wi-Fi Setting of the camera to your own network.
12 At SSID, select your own network (Home network).
13 Enter the password of your own network here and select "SEND". By selecting the eye symbol
on the right side, you can see what you are typing. After selecting "SEND", the camera stops
transmitting its Wi-Fi signal. The night light at the bottom of the camera stops flashing slowly,
then lights continuously.
14 You will then be asked to close the app. Open the app again after the light has turned off and
you have seen 3 short light flashes.
15 Swiping from left to right or from top to bottom allows you to point the camera in the desired
position (Pan/Tilt adjustment).
Comment
If the installation has failed for some reason, start over at the beginning of this chapter. Disconnect
the camera from the power by turning the camera off and then removing the adapter from the
power outlet.
- 9 -