Frequently Asked Questions (Faq) And Troubleshooting; Technical Specifications - ELRO BABY MONITOR ROYALE Bedienungsanleitung

o
Open the camera. You will receive a message that the current password is unsafe
and has to be changed. Press ok.
o
Fill in the default password 000000 and your new password. Your new password
should contain at least 6 characters, one uppercase letter, one lowercase letter, one
digit and one special character (choose from: ~`@#$%^*()_-+=|{}[].?/).
•
For Android:
o
Fill in the default password 000000 when a notification pops up and click on
confirm.
o
Open the camera. You will be asked to fill the default password 000000 and your
new password. Your new password should contain at least 6 characters, one
uppercase letter, one lowercase letter, one digit and one special character (choose
from: ~`@#$%^*()_-+=|{}[].?/).

Frequently asked questions (FAQ) and troubleshooting

Are you having problems with the installation of this device? Please visit
quick answer to your question. Here you will find the latest version of the instruction manual,
answers to frequently asked questions (FAQ) and detailed installation videos.
13. My camera is out of range.
o
Make sure the antenna of the monitor is fully extended when using the system.
This will result in an optimal range of the baby monitor.
14. I'm unable to connect the camera with my smartphone.
o
For the installation of the app you need to have a pure 2.4GHz wifi signal. This
means that you cannot use a combined wifi signal that transmits both 2.4GHz and
5GHz. Before the installation, the 5GHz signal must be temporarily switched off.
After the installation, the 5GHz signal can simply be switched back on again.
o
Another possibility is to create a separate 2.4GHz 'guest network'.
o
Do not open the app again until the camera light is off.
15. I can't see the wifi that the camera sends out on my phone.
o
If the wifi name does not appear in the wifi list, you can use the alternative
connection method explained earlier.
16. I can't watch the camera's live view when using 4G.
o
Use a separate 2.4GHz wifi signal. This is usually a 'calmer' connection.

Technical specifications

System
Frequency
Transmitter power
RX sensitivity
Spread
Modulation
Data speed
2.4 GHz (Wi-Fi) 2.4 GHz (FHSS)
17dBm (FHSS), 15+/-1dBm (Wi-Fi)
- 88dBm (FHSS), - 89dBm (Wi-Fi)
FHSS, Wi-Fi
GFSK, 502.11g/n | GFSK, 802.11g/n
4Mbps (FHSS), Wi-Fi (802.11b/g/n), Wi-Fi (802.11b/g/n)
- 15 -
www.elro.eu/faq to get a