Split Screen And Switching Live Views Automatically; Split And Quad Screen; Switching Live Views Automatically; Elro Babycam App - ELRO BABY MONITOR ROYALE Bedienungsanleitung

6 Change temperature display in Celsius or Fahrenheit and set the range of the temperature
alarm.
7 Volume control of the alarm and each individual camera.
8 Factory settings, reset the monitor to factory settings.
9 Back to the previous page.
10 Back to current actual image display (Live View).

Split screen and switching live views automatically

If 2 or more cameras are added to the monitor it is possible to view the live views in split screen or
even in quad screen. It is also possible to let the monitor switch between the live views of the
different cameras every 5 seconds.

Split and quad screen

1 Add an additional camera as described in 'Pairing the camera to the monitor'.
2 Press bottom left in the home screen to view your cameras in split or quad screen.
In this screen it is possible to view all live views from the cameras. It is also possible to switch
between the sound the cameras record. To do this, press in the top right of the screen. If you press
one of the live views, the monitor will only show the live view of that camera.

Switching live views automatically

It is possible to change to live views of the cameras automatically by clicking on the icon with the
check mark bottom left in the split or quad screen overview. The live view shown on the monitor
will then change every 5 seconds.

ELRO Babycam app

Go to the Google Play Store or Apple App Store to download the ELRO Babycam app and install it
on your smartphone. We advise you to turn off the monitor when installing the ELRO Babycam
app. To connect the camera to the ELRO Babycam app, you need to connect the adapter and set
the switch to the ON position first. You should then connect your phone to the Wi-Fi signal that is
transmitted by the camera. You can only connect the camera with a 2,4 GHz Wi-Fi signal (5GHz Wi-
Fi is not possible). If you have an Android smartphone, follow the steps under "Android
smartphone. If you have an iOS smartphone, follow the steps under "iOS smartphone".

Android smartphone

1 Press the reset button until the night light underneath the camera flashes 3 times.
2 Then, briefly press the reset button 1 time, the night light will quickly flash.
3 After 10 seconds, briefly press on the reset button 1 time, the night light will start to flash
slowly.
4 Now go to the Wi-Fi settings of your smartphone and connect to the Wi-Fi signal of the
camera ending on - - - - - 111A with your smartphone (Comment: This network does not have
access to the internet). If you are asked to switch to a different network, choose to cancel.
5 Open the ELRO Babycam app and add the camera by selecting "Add Device".
6 Then scan the QR code, which you will find on the bottom of the camera.
- 8 -