Power Save - Plustek SmartOffice PS406 Benutzerhandbuch

5. Click on the Start button to begin the calibration process.
6. The scanner pulls the calibration sheet through the scanner, which completes
this scanner calibration. After the calibration is complete, click OK and then
click Finish.
P S
OWER AVE
To save power consumption, the scanner light source always automatically turns
itself off after the scanning process is finished. If the scanner will not be used for a long
period of time, shut down the scanner and then disconnect the power cable from the
power outlet.
Information
The scanner will enter the standby mode
(sleep mode) after it is idle for 10 minutes.
Simply press any scanner button on the
scanner panel and the scanner will return
back to the normal status.
From the Windows START menu, point to
All Programs > Your Scanner Model
Name, and then click Scanner Utility. Refer
to the online help of Scanner Utility to
explore more about standby mode.
37