Loosening Documents; Placing Documents - Plustek SmartOffice PS406 Benutzerhandbuch

Items other than paper, e.g., cloth, metal foil.
Attention
L o o s e n i n g D o c
L o o s e n i n g D o c
Before loading documents into the ADF, loosen them as follows:
1. Fan the documents so that no two pages are sticking together.
2. Hold the documents upside down with both hands, and then gently push them
onto a flat surface to align the edges of all documents.
This will allow documents being fed into the ADF one at a time and prevent paper-
feeding errors.
P D
LACING OCUMENTS
1. Load the documents, headfirst and face down, toward the center of the ADF
paper chute and all the way into the ADF until touching the bottom.
For single-sided scans, load the documents face down so that the side to be
scanned faces towards the paper chute.
For double-sided scans, load the desired page order of documents face down
so that the side to be scanned faces towards the paper chute.
DO NOT use the ADF to scan photographic
sheets or particularly valuable document
originals; wrinkles or other damages can
happen in case of paper feeding errors.
DO NOT place paper with wet ink or
correction fluid into the ADF.
minutes for it to get dry.
u m e n t s
u m e n t s
18
Wait few