Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10. After the software is installed, close all open applications and click the Finish
button to restart your computer.
Information
S
t
e
p
4
.
T
e
s
t
i
n
S
t
e
p
4
.
T
e
s
t
i
n
The following describes how you can check if the scanner is properly functioning
with your computer and the scanning software by performing your first scan with our
bundled application NewSoft Presto! PageManager.
double check to make sure that all connections are securely fastened.
To test the ADF scanning:
1.
Load a document headfirst and face down into the ADF with the text side facing
the paper chute. (For detailed instructions on loading paper into the ADF, please
refer to the "Placing Documents" section of this guide.)
2.
Click the Windows Start button to launch NewSoft Presto! PageManager.
3.
(If you have only one scanner connected with your computer, please skip to Step
4.)
If you have more than one scanner or other imaging device installed on your
computer: Click Select Source from the File menu of Presto! PageManager and
then choose this scanner as the default scanning source.
4.
Within Presto! PageManager, click Tools > Scan Settings > uncheck "Suppress
TWAIN User Interface" > OK. Click File > Acquire Image Data.
5.
Select ADF (Front Side) as the Scan Type within the TWAIN window.
6.
Click the Scan button.
If the scanner installation is not started and
displayed automatically on the screen, click
Start, select Run and type in D:\Install (where
D: is the drive letter assigned to the CD-ROM
drive of your computer.)
g
t
h
e
S
c
a
n
n
e
r
g
t
h
e
S
c
a
n
n
e
r
Before testing your scanner,
14
Werbung
Inhaltsverzeichnis
Fehlerbehebung
